5 Tips for Installing Easy Brackets

1. If the arm on the lock hits the docking post (not allowing the Easy Brackets to lock in place), follow these fitment steps: Remove the bracket from the motorcycle and loosen the docking posts. Install the bracket and slightly shake the bracket to align the docking posts. Re-tighten the docking posts with the bracket on the motorcycle. If the bracket is still not fitting properly, remove the bracket and apply a lubricant such as WD-40 to the slot of each docking post. Reinstall the Easy Brackets.

2. The lock arm doesn’t have to swing all the way out to unlock the brackets. The locking mechanism is designed to only swing 45 degrees to open. The arm will hit the back of the bag. This is ok.

News

Related post

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping
      Apply Coupon